Crimping Tool Pass Through CAT6 (GuangQing)

A GuangQing Pass-Through CAT6 Crimping Tool is an all-in-one network tool designed to cut, strip, and crimp RJ45 pass-through connectors for CAT6, CAT5e, and CAT5 cables. Its pass-through blade trims the excess wires flush against the front of the connector as it compresses the pins.

How to Use a Pass-Through Crimper

Strip the cable: Use the built-in stripper to remove about one inch of the outer jacket from the CAT6 cable.

Arrange the wires: Untwist the pairs and line up the 8 wires using the T568A or T568B color standard.

Insert into plug: Push all 8 wires straight through the front openings of the CAT6 pass-through RJ45 connector.

Check the order: Verify that the color sequence is correct through the clear end before proceeding.

Crimp and trim: Place the plug into the tool cavity and squeeze the handles firmly to crimp the pins and cleanly slice off the protruding tail wires.

Key Features

All-in-one design: Combines a wire stripper, flat cutter, and modular crimping die.

Flush cutting blade: Automatically shears extra wire cleanly off the face of the connector during the crimp cycle.

Error reduction: Allows visual verification of wire layout prior to final termination.